Aluminum Disc
Aluminum Disc
Complete Halo Rack Assembly
Complete Halo Rack Assembly
Titanium Disc Racks
Titanium Disc Racks
Aluminum Panel Rack Assemblies
Aluminum Panel Rack Assemblies
Aluminum (0.80 Thickness) Disc Racks
6061 T6 aluminum (.080 Thickness) disc rack assembly using large disc in conjunction with small disc to achieve 3 point contact. Discs are connected by bolting to disc brackets. Rack assemblies are shipped knocked down to facilitate packing.


Large Disc Notched:
7 1/2″
Small Disc Notched:
4 3/4″
Disc Bracket:
1 1/4″ x 2″
3/16″
Spacing between discs is fully adjustable. Any number of discs
may be used depending on
length of stem. Standard stems available in 36″ & 40″ lengths.
Parts List:
Large Disc
Small Disc
Disc Bracket
Stem – 1/4 X 3/4 X 36″
Stem – 1/4 X 3/4 X 40″
Nut & Bolt 1/4 – 20 X 1/2″
Nut & Bolt 1/4 – 20 X 1
Complete Halo Rack Assembly
All pin rack stems and approximately 3/4″ of pins are plastisol coated. The number of parts per rack is based on using two pins per part. First pin is 9″ from top hook. Overall length is 36″. Special two-way racks or any special pin spacing on request.
•Titanium racks with 1/8″ and 5/32″ pin diameter, copper hooks, aluminum stem and titanium pins.
•Stainless racks with 3/32″, 7/64″ and 1/8″ pin diameter, copper hooks, brass stem and stainless steel pins.
| Parts List | |
|---|---|
| 2 | 33” Slotted Spline w/ Twist |
| 1 | 24” Slotted Cross Memmer |
| 1 | Halo In |
| 1 | Halo Out |
| 1 | Halo Cut |
Bolts with Nuts
1/4 – 20 x 3/4″
Titanium & Disc Racks
Parts List
(Racks as shown)
1 pair standard discs
1 pair standard discs with limiter
1 spline
1 hook
1 hook and all fasteners
| A-Rack | |
|---|---|
| A | Standard A-Disc |
| B | Standard A-Disc with limiter |
| C | Standard A-Disc |
| D | Standard A-Disc with limiter |
| C-Rack | |
|---|---|
| E | C-Hook |
| F | Standard C-Disc |
| G | Standard C-Disc with limiter |
| H | Standard C-Disc |
| I | Standard C-Disc with limiter |
Aluminum Panel Rack Assemblies
6061 T6 Aluminum Panel Rack Assembly complete. Fully adjustable with three point contact. Shipped knocked down to facilitate packing.


| Parts List | |
|---|---|
| Large Rack Section | .080 5 1/4″ X 24“ |
| Small Rack Section | .080 X 3 1/4″ X 24″ |
| 27″ Angle (Drilled) | 3/16″ – 1 1/4″ X 1 1/4″ |
| 33″ Slotted Spine | 1/4″ X 1″ |
| 39″ Slotted Spine | 1/4″ X 1″ |
Bolts with Nuts
(6061 T6 Aluminum)
1/4 – 20 X 1/2″ Long
1/4 – 20 X 3/4″ Long
1/4 – 20 X 1″ Long